BOISELUMBER

Products

Live Edge Slabs & Specialty Wood

Every live edge slab is a one-of-a-kind piece shaped by nature — no two are alike. Boise Lumber matches your request with a partner supplier for slabs in a range of species and sizes. Availability, sizes, and pricing are set by the supplier, so send your specifications and request a quote.

Get a Free Quote

Tell us what you need — we respond within 24 hours.

The Basics

What Are Live Edge Slabs?

A live edge slab is a wide plank of wood cut lengthwise from a log with one or both natural edges left intact. Instead of being ripped straight at the mill, the outer contour of the tree is preserved — bark, cambium layer, and the organic curves that give each tree its unique silhouette. The result is a piece of wood that looks and feels like what it is: a cross-section of a living tree.

Live edge slabs are typically cut 2 to 4 inches thick using a large bandsaw mill or an Alaskan chainsaw mill. After cutting, slabs are stacked with stickers (spacers) between layers and either air-dried for 1–2 years or kiln-dried over several weeks to bring the moisture content down to a stable 6–8%. Proper drying is essential — a slab that's too wet will warp, crack, and check as it loses moisture after installation.

The appeal of live edge is its authenticity. Every knot, crack, mineral streak, and bark inclusion tells the story of the tree's life. No factory or CNC machine can replicate the beauty of a walnut crotch figure, the shimmer of curly maple, or the dramatic sweep of a natural edge that follows a branch scar. When you choose live edge, you're choosing a material with genuine history.

Live Edge Characteristics

Natural Edge

The outer contour of the tree, preserved with its organic curves, irregularities, and sometimes bark. This is the defining feature of a live edge slab.

Bark Retention

Some slabs retain their bark, which can be preserved with epoxy or CA glue for a striking visual. Others have bark removed to reveal the smooth sapwood beneath.

Figure & Grain

Many slabs display dramatic figure — curly, quilted, spalted, or crotch figure that creates depth and movement in the wood surface.

Cracks & Voids

Natural checks, cracks, and knot voids are common and add character. These can be filled with epoxy (clear, tinted, or colored) or left open for a raw look.

Sapwood Contrast

The lighter sapwood along the live edge often contrasts beautifully with the darker heartwood, creating a natural gradient that highlights the slab's shape.

Available Species

Species Commonly Available as Slabs

Slab availability depends on what regional mills, salvage operations, and urban tree removals produce. These are the species most commonly sought in slab form — request a quote to find out what partner suppliers currently have or to ask for a specific species.

Black Walnut

Color:Rich chocolate brown heartwood with creamy tan sapwood
Grain:Straight to slightly wavy, with occasional crotch figure and curl
Hardness:1,010 lbf (Janka) — medium hardness, excellent workability
Best Uses:Dining tables, conference tables, desks, mantels, headboards

The most popular live edge species in America, and for good reason. Walnut's deep brown color, dramatic sapwood contrast, and workability make it the gold standard for slab furniture. Slab size varies widely with the log, and book-matched pairs are often used for larger tables.

Bigleaf Maple

Color:Pale cream to light golden, darkening slightly with age and UV exposure
Grain:Highly variable — often curly, quilted, spalted, or birdseye figured
Hardness:950 lbf (Janka) — medium hardness, excellent for finishing
Best Uses:Statement tables, art pieces, bar tops, waterfall-edge desks

Pacific Northwest bigleaf maple can produce spectacular figured wood. Curly maple catches light and creates a three-dimensional shimmer effect that photographs don't do justice. Spalted maple — partially decayed to create black zone lines — makes stunning tabletops.

White Oak

Color:Light tan to medium brown with golden undertones
Grain:Prominent ray fleck on quartersawn faces, straight grain on flatsawn
Hardness:1,360 lbf (Janka) — hard and extremely durable
Best Uses:Kitchen tables, countertops, outdoor furniture, bar tops

White oak is the workhorse of the hardwood world — hard, durable, rot-resistant, and beautiful. Its closed-pore structure makes it naturally water-resistant, which is why it's been used for centuries in boatbuilding and barrel-making. White oak slabs are ideal for kitchen tables and counters where spills are inevitable.

Redwood

Color:Deep reddish-brown heartwood with a distinctive warmth
Grain:Straight and even, with occasional burl figure in old-growth pieces
Hardness:420 lbf (Janka) — soft, works easily but dents readily
Best Uses:Mantels, benches, coffee tables, outdoor tables, wall art

Redwood slabs bring warmth and drama to any space. Old-growth redwood — often from salvage operations and reclaimed structures — displays tight grain and deep color that new-growth redwood can't match. Redwood is naturally resistant to rot and insects, making it one of the few slab species suitable for outdoor furniture without chemical treatment. Both new-growth and salvaged old-growth slabs may be available.

Douglas Fir

Color:Warm orange-tan with prominent growth rings and resinous character
Grain:Strong vertical grain pattern, especially in old-growth material
Hardness:660 lbf (Janka) — medium-soft, easy to work
Best Uses:Mantels, shelves, benches, rustic tables, commercial installations

Reclaimed old-growth Douglas fir slabs are prized for their tight vertical grain and warm patina. Often sourced from deconstructed buildings, bridges, and industrial structures, these slabs can carry a century or more of history. The tight grain of old-growth fir is visually striking and often harder than new-growth material. Excellent for mantels and shelving where the grain pattern is on full display.

Cherry

Color:Light pinkish-brown when fresh, deepening to a rich reddish-brown over time
Grain:Fine, straight grain with a satiny luster when finished
Hardness:950 lbf (Janka) — medium hardness, finishes beautifully
Best Uses:Dining tables, desks, nightstands, jewelry boxes, accent pieces

American cherry is beloved for its warm tone that deepens dramatically with exposure to light — a fresh cherry slab will look completely different after six months in a sunny room. The grain is fine and even, making it one of the smoothest species to sand and finish. Cherry slabs are typically narrower than walnut (12–30 inches is common), making them ideal for desks, sofa tables, and smaller dining tables.

Slab Sizing

Choosing the Right Slab for Your Project

Selecting the right slab starts with understanding the final dimensions your project requires — and then adding margin for processing. A slab will lose 1/4 to 1/2 inch of thickness during flattening and sanding. Width and length should exceed your finished dimensions by at least 2 inches on each side to allow for squaring up the ends and cleaning up the straight edge (if applicable).

Thickness matters more than you might think. A 2-inch-thick slab that finishes to 1.75 inches looks substantial on a dining table but might feel thin on a conference table. For mantels, 3 inches or more creates the visual weight that the application demands. Thicker slabs also resist warping better over time, especially in wider pieces.

When you select a slab, whether in person or from photos, check each one you're considering at multiple points — slabs taper in width, vary in thickness, and may have a bow or twist that affects how much usable material remains after flattening. Ask the supplier for measurements at several points along the slab.

Recommended Slab Sizes by Project

Dining Table (seats 6)36–42" wide x 72–84" long x 2–2.5" thick
Dining Table (seats 8–10)40–48" wide x 96–120" long x 2–3" thick
Coffee Table20–30" wide x 48–60" long x 1.5–2" thick
Desk24–30" deep x 60–72" long x 1.75–2.5" thick
Fireplace Mantel8–12" deep x 48–72" long x 3–5" thick
Kitchen Counter / Bar Top25–36" deep x length varies x 1.75–2.5" thick
Bench Seat14–18" deep x 48–72" long x 1.5–2" thick
Floating Shelf10–14" deep x 36–60" long x 1.5–2" thick

Finishing Options

Bringing Your Slab to Life

The right finish protects the wood, enhances its natural beauty, and determines how the piece looks and feels for years to come. Here are the most common finishing methods and how they differ.

Epoxy Fill

Clear or tinted epoxy fills cracks, knot voids, and bark pockets while preserving their visual character under a glass-like surface. River tables — where a channel of colored epoxy flows through the center of a split slab — have become a signature look. Bar-top epoxy is formulated to self-level and cure crystal clear, and tinting options include translucent blues, greens, blacks, and metallics.

Natural Oil (Hardwax Oil)

Hardwax oils like Rubio Monocoat and Osmo penetrate the wood fibers and cure from within, creating a matte, natural-feeling surface that highlights grain and figure without a plastic sheen. The surface feels like bare wood — warm and tactile. Oils are food-safe when cured, repairable (just sand and recoat the damaged area), and bring out chatoyance in figured species like curly maple.

Polyurethane

Oil-based or water-based polyurethane builds a durable film on the surface that protects against scratches, water rings, and daily wear. Oil-based poly adds warmth and amber tone; water-based stays clearer. Multiple coats with light sanding between create a smooth, hard surface ideal for kitchen counters and bar tops that see heavy use. The tradeoff is a more "finished" look and feel compared to oil.

Wax

A traditional paste wax finish gives the slab a soft, low-luster sheen and a silky feel. Wax alone doesn't provide much protection against water or heat, so it's best suited for pieces that won't see heavy daily use — mantels, display shelves, and accent pieces. Often applied over an oil base coat for added protection while maintaining the soft, natural aesthetic.

Live Bark Preservation

If your slab has intact bark and you want to keep it, the bark must be stabilized to prevent it from flaking off over time. Thin cyanoacrylate (CA) glue penetrated into the bark fibers, followed by a protective clear coat, locks the bark in place while preserving its texture and color. Not all bark survives the drying process, so check the condition of the bark before you buy.

No Finish (Raw)

Some buyers prefer to finish slabs themselves or leave them raw for a completely natural look. Ask whether a partner supplier can flatten and sand a slab to your desired grit level (typically 120 as a starting point or 220 for ready-to-finish) and leave the finishing to you.

Processing Steps

From Raw Slab to Finished Surface

A raw slab straight from the kiln is rough, uneven, and not yet ready for its final application. The processing steps between raw slab and finished product require specialized equipment that most home shops don't have — particularly for wide slabs that exceed the capacity of standard planers and jointers.

Some partner suppliers offer slab processing, from flattening through finish application, while others sell slabs as-is. Ask what is included. Some buyers want a fully finished, ready-to-install slab with legs attached, while others just need it flattened so they can handle sanding and finishing in their own shop.

Experience matters. Reading grain direction, managing tear-out, and handling the unique challenges of wide slab work are skills that take practice, so ask who will do the work.

Slab Flattening

With a router sled system or a wide-belt sander, both faces of a slab can be flattened to a consistent thickness. This removes twist, bow, cup, and high spots, creating a true, flat surface ready for sanding. Flattening typically removes 1/4 to 1/2 inch of total thickness.

Sanding

Progressive sanding from 80 grit through 220 grit (or finer) creates a smooth, finish-ready surface. Both faces are sanded, and the live edge can be eased or rounded for a comfortable touch. For figured woods, wet-sanding or adjusted techniques can minimize tear-out in changing grain.

CNC Leveling

For slabs that are too large or too warped for conventional flattening, a CNC router can provide flat surfaces across any width. CNC flattening is especially valuable for book-matched pairs that need to meet seamlessly along the joint line.

Edge Treatment

The live edge can be cleaned by removing loose bark and cambium, smoothing rough spots, and shaping the edge profile. Options include natural (bark on), cleaned (bark removed, smooth sapwood), or refined (lightly sculpted for a uniform feel along the entire edge).

Leg & Base Attachment

Steel hairpin legs, trestle bases, X-frames, and custom-fabricated bases are commonly sourced from local metalworkers or hardware suppliers. Mounting involves drilling, threading, and attaching the base so the slab is ready to set on the floor. Wood bases (pedestal, trestle) are also an option.

Pricing

How Live Edge Slabs Are Priced

Unlike dimensional lumber that's priced by the board foot at a fixed rate per species and grade, live edge slabs are priced individually based on several factors that affect both rarity and desirability.

Species

The species of wood is the primary pricing factor. Black walnut commands a premium due to high demand and limited supply. Bigleaf maple with figure is similarly valued. Douglas fir and cherry slabs are often more affordable. Regional species like Idaho white pine may offer good value.

Size (Width, Length, Thickness)

Wider slabs cost more per board foot because they come from larger, older trees — which are increasingly rare. A 48-inch-wide walnut slab commands a significantly higher per-foot price than a 24-inch-wide slab from the same species. Thickness also factors in, as thicker slabs require larger logs and longer drying times.

Figure & Character

Slabs with exceptional figure — curly, quilted, birdseye, spalted, or crotch — are priced at a premium over straight-grained material. Figure is rare and unpredictable, and heavily figured slabs are sought after by furniture makers, artists, and collectors worldwide.

Rarity & Provenance

Old-growth material, salvaged urban trees with known history, and slabs from unusually large or old specimens carry additional value. A slab milled from an old urban tree with a known history has a story that adds meaning — and market value — to the finished piece.

Partner suppliers set slab pricing and quote it by the piece or by the board foot. Request a quote with your preferred species, approximate dimensions, and intended use.

How to Order

Finding Your Perfect Slab

Choose in Person

The best way to choose a live edge slab is to see it, touch it, and stand it up to visualize it in your space. If a partner supplier has slabs on display, ask whether you can browse them in person.

  • ✓Browse available slabs in person where the supplier allows
  • ✓Evaluate width, thickness, and figure
  • ✓Compare species side by side
  • ✓Discuss processing and finishing options
  • ✓Ask whether a slab can be held while you finalize your project plans

Request by Quote

Can't visit in person? Slabs are often chosen from photos. Here's how it typically works:

  • ✓Submit a quote request with your project details — species, approximate size, and intended use
  • ✓A partner supplier follows up with matching slabs, if available
  • ✓Ask for detailed photos showing grain, figure, edge profile, and any defects
  • ✓Choose your slab based on the photos and the supplier descriptions
  • ✓Ask about pickup or delivery options for your slab

Find Your Slab

Every slab is unique — once a piece is sold, it is gone. If you're planning a live edge project, send your specifications in a quote request and a partner supplier follows up with options.